The correct connection between board and board connector products can improve the service life of products and ensure the good operation of mechanical equipment. The failure and untimely treatment of board to board products will bring immeasurable economic losses.

1. Board to board connector connection

The board to board plug socket is used to electrically connect two independent circuit boards,

Including a first connector connected to the circuit board guide and a transmission connector used as a serial connection with the first connector,

Wherein the first connector has a first terminal connected to the circuit board guide and a body containing the first terminal.

The transfer connector has a second terminal and a body containing the second terminal. The two extended ends of the second terminal can be inserted separately from the first terminal,

So as to realize the conductive connection with the first connection arranged on the two circuit boards, wherein the two ends of the first terminal and the second terminal are provided with reverse bending elastic parts,

Moreover, the body and the second terminal can select an appropriate extension length according to the spacing setting standard of the circuit board.

2. Troubleshooting of board-to-board connectors

Once the product fails, it can be judged that the reason is that the wire is broken and the product is loose.

The frequency of intermediate wire breakage is not high, and most of them are broken at the joint, so the focus of inspection should be on the sensor and connecting wire,

Check whether they are loose and have poor contact. Generally, poor contact caused by circuit failure is mostly due to corrosion at the end of the product,

External dirt enters the terminal or connection socket, causing the contact pressure to decrease. In order to deal with this problem, you need to remove the connector and then reinsert it,

Change its connection conditions so that it can resume normal contact.